Does the Anker Nano II 65W Fast-Charge the Nothing Phone?
Yes — this combination fast-charges at up to 45W via PD PPS.
Both sides speak PD PPS, and the Anker Nano II 65W delivers enough power for the Nothing Phone to hit its full 45W ceiling.
The details
| Device | Nothing Phone (2) |
|---|---|
| Charger | Anker Nano II 65W (A2149) |
| Negotiated wattage | 45W |
| Protocol | PD PPS |
| Match quality | Full speed |
How your cable affects this
The wattage above assumes an adequately rated cable. Here's what actually happens with three common cable situations:
| Cable | Real wattage | Cable-limited? |
|---|---|---|
| Standard 60W-rated cable (3A, not e-marked) | 45W | Not the bottleneck |
| 100W / 5A e-marked cable | 45W | Not the bottleneck |
| Unrated / unknown cable (assume worst case) | 40W | Cable-limited |
Frequently asked questions
- What's the maximum charging speed for the Nothing Phone with the Anker Nano II 65W?
- Up to 45W via PD PPS, assuming you're using an adequately rated cable.
- Do I need a special cable for this combination?
- Any standard USB-C cable rated 3A or higher works fine — no special "e-marked" cable needed at 45W.
- Is there a faster charger for the Nothing Phone?
- Not among the chargers we recommend for it — the Anker Nano II 65W already delivers the Nothing Phone's full 45W ceiling.
Other chargers compatible with the Nothing Phone
Other devices compatible with the Anker Nano II 65W
Checking a different phone, charger or cable? Run it through the full calculator.
Open in the calculator