Does the Anker Nano II 65W Fast-Charge the Xiaomi Redmi Note 13 Pro?
Yes — this combination fast-charges at up to 22W via USB PD.
Both sides speak USB PD, but the Anker Nano II 65W's port tops out lower than the Xiaomi Redmi Note 13 Pro's 67W ceiling, so you get 22W instead of the device's absolute max.
The details
| Device | Xiaomi Redmi Note 13 Pro |
|---|---|
| Charger | Anker Nano II 65W (A2149) |
| Negotiated wattage | 22W |
| Protocol | USB PD |
| Match quality | Full speed |
How your cable affects this
The wattage above assumes an adequately rated cable. Here's what actually happens with three common cable situations:
| Cable | Real wattage | Cable-limited? |
|---|---|---|
| Standard 60W-rated cable (3A, not e-marked) | 22W | Not the bottleneck |
| 100W / 5A e-marked cable | 22W | Not the bottleneck |
| Unrated / unknown cable (assume worst case) | 22W | Cable-limited |
Frequently asked questions
- What's the maximum charging speed for the Xiaomi Redmi Note 13 Pro with the Anker Nano II 65W?
- Up to 22W via USB PD, assuming you're using an adequately rated cable.
- Do I need a special cable for this combination?
- Any standard USB-C cable rated 3A or higher works fine — no special "e-marked" cable needed at 22W.
- Is there a faster charger for the Xiaomi Redmi Note 13 Pro?
- Yes — the Xiaomi 120W HyperCharge Combo Charger reaches 67W with this device. See the full Xiaomi Redmi Note 13 Pro charging guide for the complete ranking.
Other chargers compatible with the Xiaomi Redmi Note 13 Pro
Other devices compatible with the Anker Nano II 65W
Checking a different phone, charger or cable? Run it through the full calculator.
Open in the calculator