Does the Anker Prime 100W Charger Fast-Charge the Xiaomi 14 Pro?
Yes — this combination fast-charges at up to 27W via USB PD.
Both sides speak USB PD, but the Anker Prime 100W Charger's port tops out lower than the Xiaomi 14 Pro's 120W ceiling, so you get 27W instead of the device's absolute max.
The details
| Device | Xiaomi 14 Pro |
|---|---|
| Charger | Anker Prime 100W Charger (2-Port USB-C, 1-Port USB-A) |
| Negotiated wattage | 27W |
| Protocol | USB PD |
| Match quality | Full speed |
How your cable affects this
The wattage above assumes an adequately rated cable. Here's what actually happens with three common cable situations:
| Cable | Real wattage | Cable-limited? |
|---|---|---|
| Standard 60W-rated cable (3A, not e-marked) | 27W | Not the bottleneck |
| 100W / 5A e-marked cable | 27W | Not the bottleneck |
| Unrated / unknown cable (assume worst case) | 27W | Cable-limited |
Frequently asked questions
- What's the maximum charging speed for the Xiaomi 14 Pro with the Anker Prime 100W Charger?
- Up to 27W via USB PD, assuming you're using an adequately rated cable.
- Do I need a special cable for this combination?
- Any standard USB-C cable rated 3A or higher works fine — no special "e-marked" cable needed at 27W.
- Is there a faster charger for the Xiaomi 14 Pro?
- Yes — the Xiaomi 120W HyperCharge Combo Charger reaches 120W with this device. See the full Xiaomi 14 Pro charging guide for the complete ranking.
Other chargers compatible with the Xiaomi 14 Pro
Other devices compatible with the Anker Prime 100W Charger
Checking a different phone, charger or cable? Run it through the full calculator.
Open in the calculator